Categories

Categories

Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait...
Tom's 4x4 Superstore

Categories

Categories

Expedition Rated Jeep JK

xr-1

2015 Jeep Wrangler JK

Jeep Wrangler XR-1 Package

The Expedition Rated XR-1 package offers the consumer a great entry package at an affordable price.  Modifications provide subtle, yet noticeable, improvements while maintaining affordability.

  • 2” Spacer Lift Kit
  • 17” Alloy Wheels
  • 33” All-terrain Tires
  • ProCal Module
  • Euro Light Guard Kit
  • Floor Liner Kit
  • Expedition Rated Badging

Jeep Wrangler XR-2 Package

The Expedition Rated XR-2 package is a step above the entry level, with options geared toward use in extreme off-road conditions. This complete suspension system offers the perfect ride for both highway mileage and trail performance.

  • 5” Dual Sport XT Suspension
  • 17” Alloy Wheels
  • 33” or 35” Mud Terrain Tires
  • ProCal Module
  • Ultimate Grab Handle Package
  • Door Entry Guards
  • Euro Light Guard Kit
  • Evaporator Skid Plate
  • Floor Liner Kit
  • Expedition Rated Badging

Jeep Wrangler XR-3 Packages

The Expedition Rated XR-3 package offers the consumer a variety of modifications to enable the vehicle to tackle any extreme terrain. This complete suspension system offers the perfect ride for both highway mileage and trail performance. Additional options further improve off-road travel capability.

  • 5” Dual Sport XT Suspension
  • 17” Alloy Wheels
  • 35” Mud Terrain Tires
  • ProCal Module
  • Full Width Front Winch Bumper
  • Heavy Duty 10,500 lbs. Off-Road Winch
  • Rear Bumper w/LED Backup Lights
  • Swing Away Tire Carrier
  • A-Pillar 4 Switch Pod Kit
  • Windshield Light Mounting Brackets
  • 12-Inch Dual Row LED Hawse Fairlead Mount
  • 12-Inch LED Light Bar – Dual Row
  • 2-Inch Square LED Light Pair
  • Ultimate Grab Handle Package
  • Door Entry Guards
  • Euro Light Guard Kit
  • Evaporator Skid Plate
  • Floor Liner Kit
  • Expedition Rated Badges
BASE PACKAGES AVERAGE PRICE
JK - XR1 $4,045
JK - XR2 $5,575
JK - XR3 $10,010

 

BASE PACKAGES XR-1        XR-2 XR-3    
2015 Jeep Wrangler  $4,043.12  $   5,572.77  $  10,007.96    
           
Option O        
Standard *        
N/A N/A        
           
Expedition RATED      
Options (Including Installation) COST XR-1 XR-2 XR-3
SUSPENSION        
2.0-Inch JK Spacer Suspension Lift $494.00 * O O
2.5-Inch JK Suspension Lift $1,559.00 O * O
3.5-Inch JK DualSport SC Suspension Lift $2,475.00 O O *
3.5-Inch JK DualSport RC Suspension Lift $2,925.00 O O O
4.5-Inch JK DualSport SC Suspension Lift $2,549.00 O O O
4.5-Inch JK DualSport RC Suspension Lift $2,999.00 O O O
SPEEDOMETER CALIBRATOR        
ProCal Module $177.75 * * *
WHEELS (set of five)        
17" Alloy Wheels - Chrome $1,350.00 O O O
17" Alloy Wheels - Black $1,200.00 O O O
TIRES (set of five)        
33" Nitto All Terrain Tires $1,437.00 * O N/A
35" Nitto All Terrain Tires $1,564.40 N/A * O
33" Nitto Mud Terrain Tires $1,706.80 O O N/A
35" Nitto Mud Terrain Tires $1,627.40 N/A O *
PROTECTION        
Euro Guard Light Kit $263.76 * * O
Evaporater Skid Plate $171.25 O * *
INTERIOR        
Ultimate Grab Handles Front $47.75 O * *
Ultimate Grab Handle Rear $37.75 O * *
Door Entry Guard Set $61.75 O * *
Floor Liners Kit $181.61 * * *
Door Entry Guard Set $80.50 O * *

 

Option O      
Standard *      
N/A N/A      
         
Expedition RATED      
Options (Including Installation) COST XR-1 XR-2 XR-1
RECOVERY        
JK Wrangler Full Width Front Winch Bumper $899.00 O O *
JK Wrangler Mid Width Front Winch Bumper $812.00 O O O
JK Wrangler Rear Bumper w/LED Backup Lights $632.00 O O O
JK Wrangler Rear Bumper Tire Carrier (NEW) $1,575.00 O O O
JK Wrangler Swing Away Tire Carrier-Non Canister $1,018.00 O O *
JK Wrangler Swing Away Tire/Rotopax Carrier $1,125.00 O O O
Heavy Duty 8,500 lbs, Off Road Winch $375.00 O O N/A
Heavy Duty 8,500 lbs, Off Road Winch Synthetic $575.00 O O N/A
Heavy Duty 10,500 lbs Off Road Winch $505.00 O O O
Heavy Duty 10,500 lbs Off Road Winch Synthetic $675.00 O O *
VR8000 Recovery Winch (Steel Cable) $628.00 O O N/A
VR8000s Recovery Winch (Synthetic Cable) $862.00 O O N/A
VR10000 Recovery Winch (Steel Cable) $848.00 O O O
VR10000s Recovery Winch (Synthetic Cable) $1,135.00 O O O
Recovery Kit $120.00 O O O
LIGHTING        
A-Pillar 4 Switch Pod Kit, Black, LHD,                              11-15 Jeep Wrangler (JK) 175.32 O O *
Windshield Light Mounting Brackets 45.75 O O *
12-inch Dual Row LED Hawse Fairlead Mount 43.7 O O *
12in Cree LED Light Bar - Dual Row 234.95 O O *
2-inch Square Cree LED Lights 174.95 O O *
             

 

Package Options Breakdown

2inch spacer

This 2" Spacer Suspension System for the XR-1 package is designed for JK owners who want a quality suspension lift, but only need 2-inches of lift at an economical price. This system includes durable front and rear polyurethane coil spacers, front and rear bump-stop, extended sway-bar end-links, corrosion-resistant E-coated front and rear shock extension brackets, spacers and front brake line drop brackets.

 

duelsport2.5

The DualSport 2.5-inch suspension system for the XR-2 package is designed to appeal to Jeep Wrangler owners who want the added highway and trail performance of the taller 3.5 and 4.5-inch suspension systems, but with a reduced lift height. Much attention was paid to tuning and geometry in this system, as evidence by specially tuned coils and shocks that are unique to the needs of this lower system, resulting in frequency-tuned, triple-rate coils at all four corners and custom-tuned shocks matched to the coils.

The system is rounded out with everything needed to complete the package. This includes a custom rear track-arm, front stabilizer end link relocation brackets, bump-stop extensions and brake line relocation brackets. Combined with the springs and shocks, these components allow this 2.5-inch suspension lift to deliver impeccable on and off-highway performance, exceptional reliability, and a lower, more user-friendly lift height.

suspension-xr3-3.5

Based on factory engineering methodology, the DualSport 3.5” suspension system for the XR-3 package takes off-road suspension engineering to the next level. This system integrates OE-level suspension engineering to create a true do-anything “dualsport” suspension – one that is both extremely capable off-road, while offering unparalleled on-road performance and handling.

Utilizing proper geometry, the JK’s control-arms, track-arms, and steering components accommodate the new lifted posture of the vehicle and provide tremendous cornering and braking performance. With correct geometry in place, the springs and shocks don’t have to compensate for poor performance in these areas. OE methodology extends to the springs, where frequency-tuned coil springs share harmonious oscillation characteristics that allow them to work as a matched set, front and rear.  The major benefit is that they help to keep the JK balanced and in contact with the road, even when driven at high speed over rough surfaces. Rather than trying to mask unwanted handling problems resulting from poor geometry or spring tuning, shocks are tuned with a focus on damping suspension movement. Shocks are tuned to match this unique suspension system.

speedo-cali

Each Expedition Rated package will come with a speedometer calibrator. The ProCal Module, an essential tool in after-market modification, provides JK owners with an easy, low-cost way to make a variety of useful changes not offered by the manufacturer or any other re-programmer. Among the list of key features of the ProCal Module is the ability to correct the speedometer and gear ratio when larger tires are installed. A vehicle’s computer calculates speed based on the diameter of the stock tires, so adjusting the calibration is important when modifying a vehicle. When installing tires that are larger than original equipment tires or a ring and pinion gear set with a different rear gear ratio, the speedometer calibrator re-programs the vehicle for correct speedometer and odometer readings. The ProCal Module can also recalibrate the tire pressure monitoring system, clear engine codes, optimize ESP performance, enable one touch turn signals, and many other functions.

 

Floor Liners    

Each Expedition Rated Jeep Wrangler package will include a set of high-quality after-market floor liners. Floor mats are made of high pressure injection molded OE-quality thermoplastic that looks and feels like rubber, but provides a nonslip surface. They will not fade in the sun and can withstand the rigor of daily abuse, resistant to oil, gas, and battery acid. Each liner is custom fitted and perfectly contoured to your vehicle's floor for a precise and secure fit. Designed to compliment your vehicle, liners are available in black, tan, and grey to match almost any vehicle interior. These liners have raised lip retaining edges around the perimeter of your floor board to keep the spills and mess off your vehicle’s carpet, preserving the quality of your new vehicle, no matter where your travels may take you.

 

Wheels

Each Expedition Rated package will include wheels by Fuel Offroad. Fuel Offroad manufactures the most advanced off-road wheels, offering the latest in design and engineering innovations on the market. Fuel Offroad has been capturing the attention of off road enthusiasts with cutting edge designs, fitments, and technological advancements. A minimum of three styles of wheels are offered, including Full Blown, Hostage, and Throttle, each available in both chrome and black.

Tires

All-Terrain tires for Expedition Rated packages will come with Nitto Terra Grappler G2 tires. The Terra Grappler G2 is Nitto’s next generation all-terrain light truck tire specifically designed to meet the everyday demands of your on and off-road adventures. Through the introduction of new materials, Nitto is able to maintain the versatile all-terrain compound while increasing the longevity of the tread wear.

The Terra Grappler all-terrain tire works year-round with a balance of wet and dry performance and on-road comfort and quietness. Designed for use on trucks and SUVs, the Terra Grappler all-terrain provides balanced performance in all weather conditions over various terrains.

Nitto Trail Grappler M/T Mud-Terrain tires are included in the Expedition Rated XR-3 package and are available optionally for the XR-1 and XR-2 packages. The Trail Grappler M/T blends some of the off-road performance of the Mud Grappler with the on-road comfort of the Terra Grappler to create an off-road tire that is both aggressive and quiet.

For off-road performance, the 3-ply sidewall and thick rubber construction increase puncture resistance. On the tread surface, the blocks provide additional biting edges that command lateral stability and enhance forward traction. For on-road comfort, Nitto’s engineers used advanced sound analysis equipment to systematically reduce noise levels commonly associated with off-road tires for a quieter drive.

Light Guards

Expedition Rated XR-1 and XR-2 packages will come with a 10-piece Euro guard light kit. This kit looks as good as it performs, protecting your factory lighting system from low hanging trail obstacles. Each kit includes headlight, parking light, side marker light, factory fog light and rear tail light euro guards. This option is available for XR-3 packages as well.

 

Grab Handles

Expedition Rated XR-2 and XR-3 packages will include ultimate grab handles for the front and rear of the vehicle, constructed of tough nylon webbing with a molded sure-grip handle. These features assist passengers in safely and securely entering and exiting the vehicle. This feature is available optionally in the XR-1 package as well.

Door Entry

Expedition Rated XR-2 and XR-3 packages protect the door threshold of the new Jeep Wrangler JK with a set of door entry guards. These guards enhance the appearance of the Jeep while providing increased protection from the elements and wear from passengers entering and exiting the vehicle. This option is also available for the XR-1 package.

Skid Plate

Expedition Rated XR-2 and XR-3 packages further enhance the protection of the new Jeep Wrangler with the inclusion of an evaporator skid plate, constructed of durable 3/16 inch thick black powder coated steel. In the event of an impact, this skid plate transfers the load of the impact away from the evaporator tank and to the frame and cross member, preventing damage to critical components of the Jeep. Avoid impact damage and clear more obstacles in any expedition, off-road or in the concrete jungle. This option is also available for the XR-1 package.

 

The Expedition Rated XR-3 package for Jeep Wrangler includes even more equipment to help put the vehicle at an even higher level of off-road capability.

*These features are also available options for Expedition Rated XR-1 and XR-2 Packages as well.

 

Bumpers

The Expedition Rated XR-3 package comes with a full-width Jeep JK Wrangler bumper manufactured from 3/16-inch steel plate. This aggressively styled bumper is precision laser cut and CNC press brake formed to create a strong, tapered-angle design that uses less material to minimize weight, yet form a reinforced structure that easily slides off rocks and ledges. This bumper is set up for an integrated center winch mount with fairlead. A thick 2.5-inch diameter steel grille guard has light mount tabs built in, as well as two light pockets that fit the OEM fog lights. This system comes with two reinforced D-ring mounts and two heavy-duty D-rings. The full-width design improves the vehicle’s approach angles and allows for larger tires, up to 37 inches.

In addition to an aggressive front bumper, the XR-3 package includes a beefier rear bumper as well. This bumper is designed to protect the rear and lower quarter panels of the Jeep Wrangler from any obstacles that may be encountered, on or off-road. The same 3/16-inch plate steel is used, providing the same quality and durability front and rear. Tapered sides and bottom give this rugged protection a sleek appearance.

The Expedition Rated XR-3 package includes a swing away spare tire carrier. This carrier allows full access to the tailgate while raising the spare tire 5.5 inches higher for greater ground clearance and departure angles. Manufactured from 1.5 inch diameter, .120 wall steel tubing, this system features a heavy-duty hinge with a 500-lbs pull, lockable and adjustable draw latch. It also features a location for a Hi-Lift jack and CB antenna mount. This carrier can hold up to a 37” tire. A reinforced inner-fender brace design helps reduce vibration and highway noise, reducing noise to ensure an enjoyable highway ride. This black powder coat finish will match the front and rear bumper systems, giving the Jeep Wrangler a sleek and finished look throughout.

Off Road Winch

In conjunction with the aftermarket bumper, the XR-3 package includes a high performance 10,500 lbs. off-road winch. This winch system comes with a synthetic rope, a remote control, and a hawse fairlead. The synthetic rope is up to 40 percent stronger than Kevlar and significantly stronger than the same diameter steel cable, while only weighing in at 1/7 the weight. It will not splinter or curl like wire ropes, and will float in water. It is specially coated to be resistant to UV, abrasions, and chemical solvents, helping to ensure every component of your XR-3 Package Jeep Wrangler is ready to tackle any extreme situation.

Lighting

Expedition Rated XR-3 packages address lighting needs for the most extreme expeditions. This package includes a dual row 12-inch LED light bar with a powerful 5,760 lumen, 72 watt output and pair of 2-inch square LED lights with 1440 lumens and 18 watts. This system is waterproof and durable, with a die-cast aluminum housing. All mounting brackets are included with this system. Light up your expeditions with this sleek and efficient LED lighting system, included in the Expedition Rated XR-3 package.