Categories

Categories

Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait...
Tom's 4x4 Superstore

Categories

Categories

Factor 55 Winch Accessories

ProLinksColorATV & UTV
$99.95
16,500 lbs
$149.95
XXL 24,000 lbs
$199.95
   Red
   Part #
00110-01
00015-01
00210-01
Blue
Part #
00110-02
00015-02
00210-02
Black
Part #
00110-04
00015-04
00210-04
Silver
Part #
00110-05
00015-05
00210-05
Black
Part #
00110-06
00015-06
00210-06

Factor 55's new ProLink shackle mount for winch cables and synthetic ropes. Engineered and machined in the USA from lightweight billet 6061 aluminum, the ProLink provides a safe means to easily attach a standard (7/16" - 3/4") screw pin shackle to existing winch cable and rope eyes.

Titanium Pin & Rubber Guard Included

Fits All Winches

FlatLinks (Winches Up To 16,500 lbs)FlatLinks
$139.95
Red FlatLink
Part #
00050-01
Blue FlatLink
Part #
00050-02
Black FlatLink
Part #
00050-04
Silver FlatLink
Part #
00050-05
Gray FlatLink
Part #
00050-06

Eliminate the conventional winch hook and replace it with a safer and stronger FlatLink shackle thimble and D-ring. The FlatLink shackle mount is the Industry’s first folding shackle mount for recovery winches. With less than 1.75 inches of thickness, the Flatlink will work with all roller fairlead license plate mounting brackets.

Hitchlinks2.0 (2" Receivers)
$79.95
Red Hitchlink
Part #
00020-01
Blue Hitchlink
Part #
00020-02
Black Hitchlink
Part #
00020-04
Silver Hitchlink
Part #
00020-05
Gray Hitchlink
Part #
00020-06

Factor 55's HitchLink allows you to use your receiver as a recovery tow point. Rated at 9,500 pounds and weighs 1.9 pounds with lightweight precision CNC machined 6000 series aluminum. For standard 2" receivers and fits common 3/4" screw pin shackles / d-rings.

Never exceed factory receiver hitch pull rating

Always use a quality steel alloy 5/8” hitch pin

Always pull in line with the hitch, do not bind or side load the shackle

Hawse Fairlead1.0 (1" Thick)
$79.95
2.0 (2" Thick)
$99.95
Part #
00016
Part #
00019
WARNING!

Always confirm that the synthetic rope cannot make contact to any sharp edges like the opening in the steel fairlead mounting plate or bumper opening. In some cases it may be required to grind this slot larger. Always sand and deburr this opening after any grinding operation.

Factor 55 introduces a new line of Aluminum Hawse Fairleads. The 1.0 and 1.5 fairleads are CNC machined from 1 and 1.5 inch thick USA 6000 series aluminum bar. The industry standard fairlead thickness is .75 inches thick. The thicker aluminum bar results in a larger outer fillet radius for the synthetic rope to slide against. This results in less stress on the rope fibers during high angular pulls, increasing the life of your synthetic rope.

The rope slot height opening is taller to allow the larger ½” tube thimbles to pass through. There is also a machined outer corner chamfer to reduce rope stress for those than plan on using the winch as a front suspension “suck down” device.

For synthetic winch rope only.

    There are no products in this category.