AIR UP FOUR 35" TIRES IN 8 MINUTES-OR LESS The PowerPlant Dual Force HP is an Ultimate Performance winch and compressor in one unit, and it's perfect for the off-road enthusiast. Powered by a 4.6 hp motor, the compressor flows 5 cfm @ 90 spi, with a built-in air tank and intercooler. You can air-up four 35" tires from 8 psi to 35 psi in eight minutes or less, zip off lug nuts, and more. Best of all, the PowerPlant mounts to a vehicle like any other WARN winch.
When you switch to winch mode, the PowerPlant delivers legendary WARN winch technology and reliability. And with a 9,500 lb. capacity, fast line speed of 26.9 feet per minute (no load), and 125' of 5/16" wire rope, you'll have plenty of pulling performance.
Premium on-board air and a high-performance winch in one convenient, vehicle-mounted multi-tool: You'll wonder what you ever did without it.
Air Compressor Mode POWERPLANT HP SPECS/PART NUMBER | | Part Number: 71800 (12V) |
| Rated Line Pull: 9,500 lbs. (4310 kgs) single-line |
| Intended Use/Application: Vehicle Recovery / Tire Inflation and Air Tool Operation. For Trucks and Heavier SUVs |
Duty Cycle Rating:  |
| Motor: Gen ll Series Wound 4.6 hp 12V, with Thermal Protection Shutoff Switch |
| Remote Control: Remote switch with Thermometric LED and 12' (3.7m) lead |
| Geartrain: 3-Stage planetary |
| Gear Ratio: 156:1 |
| Clutch (freespooling): Sliding ring gear |
| Brake: Integrated direct-drive cone brake |
| Wire Rope: 125' of 5/16" |
| Fairlead: Roller |
| Recommended battery: 650 CCA minimum |
| Battery leads: 2 gauge, 72" (1.83m) |
| Finish: High-gloss black powdercoat |
| Drum Diameter/Length: 2.5"/9.0" |
| Weight: 100 lbs |
| Air Reservoir: 1/2 gallon with Integrated Air Intercooler |
| High Air Flow Rating: 12 CFM @ 0 psi, 5 CFM @ 90 psi |
| Max Air Pressure: 100 psi |
| Air Pressure Switch: Yes |
| Air Hose: 12' nylon, with quick-disconnect. Brass air fittings and couplings |
| 12V DC PERFORMANCE SPECS | Line Pull Lbs.(Kgs.) | Line Speed FT./min(M/min.) | Motor Current | Pull by layer layer/Lbs(Kgs.) | | 0 | 26.9 (8.2) | 88 amps | 1/9500 (4313) | | 2000 (910) | 14.6 (4.45) | 195 amps | 2/8650 (4927) | | 4000 (1810) | 10.3 (3.14) | 262 amps | 3/7920 (3595) | | 6000 (2720) | 7.8 (2.38) | 345 amps | 4/7400 (3359) | | 8000 (3630) | 6.1 (1.86) | 420 amps | 5/6940 (3150) | | 9500 (4310) | 5.2 (1.58) | 454 amps | |
|
| |
| Above performance specs are based on first layer of drum |
|
| Winch Dimensions: 24.31" L. x 7.0" D. x 13.46" H. (617.5mm L. x 177.8mm D. x 341.9mm H.) |
| Mounting Bolt Pattern: 10.0" x 4.5" (254mm x 114.3mm) |