The One Stop Off Road Shop

All the power and reliability of the XD9000i in a portable package. No-load retrieval line speed is fast-38 feet/minute. Integrated control pack protects the winch's electrical components, and the 4.6hp Series Wound motor delivers big torque and power. Plugs into any standard 2" Class III receiver hitch and gives you the ability to move the winch from the front or back of your rig. Power is supplied through quick connect plugs. A good choice for full-size rigs and heavier recovery situations.

This Kit includes winch, remote, carrier, 7.5' power lead with quick connect plug for front of vehicle and hawse fairlead. Front receiver and rear power lead sold separately.

XD9000i PORTLABLE SPECS/PART NUMBERS

Part Number: 37441 (12V)

Rated Line Pull: 9,000 lbs. (4080 kgs) single-line

Intended Use/Application: Vehicle Recovery / For Trucks and SUVs

Duty Cycle Rating:

Motor: 12V 4.6hp, Series Wound

Remote Control: Remote, 12' (3.7m) lead

Geartrain: 3-Stage Planetary

Gear Ratio: 156:1

Lubrication: Aeroshell #17

Clutch (freespooling): Sliding Ring Gear

Brake: Automatic Direct Drive Cone

Drum Diameter/Length: 2.5"/9.0" (6.4cm/23cm)

Weight: 104 lbs. (47 kgs.)

Wire Rope: 125', 5/16" diameter (38m, 8mm diameter)

Fairlead: Hawse

Recommended Battery: 650 CCA minimum for winching

Battery Leads: Front heavy-duty 7.5'/2.2m with quick connect plug

Finish: Argent Powder Coat

12V DC PERFORMANCE SPECS
Line Pull Lbs.(Kgs.)	Line Speed FT./min(M/min.)	Motor Current	Pull by layer layer/Lbs(Kgs.)
0	38(11.6)	70 amps	1/9000(4082)
2000(910)	14.4(4.39)	180 amps	2/8190(3715)
4000(1810)	11(3.35)	255 amps	3/7500(3402)
6000(2720)	8.67(2.64)	330 amps	4/7010(3180)
8000(3630)	6.88(2.10)	415 amps	5/6570(2980)
9000(4080)	6.38(1.94)	460 amps

  Above performance specs are based on first layer of drum